New Laboratory Fluid Bed - Strea-1™

 Print     Send link
Home / GEA Pharma Systems / Pilot Plants / New Laboratory Fluid Bed - Strea-1™

Suitable for processing with organic solvents

The Strea-1™ laboratory fluid bed from Aeromatic-Fielder combines versatility with table-top practicality. Purpose designed for processing of fine powders, pellets, granules, crystals, tablets and organic solvents, the Strea-1™ is the flexible choice when taking the first steps towards process optimisation.

Product drying, top spray granulating and coating - in volumes ranging from 200ml to two litres - can all be handled by the Strea-1™, thanks to its interchangeable components and containers. The Strea-1™ has been supplied to research centres and companies for use in the production of pharmaceuticals, foodstuffs, dairy products, fine ceramics and chemicals.

New Laboratory Fluid Bed
New Laboratory Fluid Bed

Continuing Aeromatic-Fielder's strong commitment to research and development and high quality standards, the Strea-1™ is a vital addition to the laboratory benchtop.

Main Features

  • Easy manoeuvrability due to table-top size
  • Ready to plug into standard laboratory utilities
  • Easy operation
  • Simple to clean and maintain
  • Special air distributor plate for controlled product movement
  • Continuously operating blow-back filter cleaning system
  • Allen Bradley PLC
  • Monochrome Touch-screen
Technical Data
Product volume
200ml-2l
Air flow
2 m3/min.
Stat. pressure
5000N/m2
Motor power
1.00 kW
Current type
single / three-phase, plus neutral, plus earth
Frequency
50 / 60 Hz
Voltage
220 / 380 / 440 v
Compressed Air
4 bar minimum
Heating capacity
90°C 2.2kW
Container volume
16.5l
Weight
75 kg

 

Dryer

Air is filtered and heated prior to passing through the distributor plate fluidizing the product and absorbing moisture. The product is completely contained within the unit due to the highly efficient product filters.

 Drying
Drying

 

Granulator

A binding agent is sprayed onto the fluidized product for controlled agglomeration. The formed agglomerates are subsequently dried.

 Granulation
Granulation

 

Coater

Liquid is sprayed onto the product from below to ensure uniform coating. An attachment for top spray coating is also available.

 Coating
Coating

Available Options

  • Instrumentation for measuring air flow, product and filter pressure drop
  • Two-fluid nozzle for atomizing liquids
  • Heatable nozzle for atomizing melts
  • Selection of material for product filter
  • Device for product sampling
  • 'Jumo' colour screen data-recorder
  • Printer
  • DQ, IQ, OQ qualification documentation

GEA Pharma Systems unites the technologies of Aeromatic, Buck, Collette, Courtoy, Fielder, Nica™ and Niro to supply advanced processing solutions for solid dosage forms to the pharmaceutical industry.

To initiate inquiries on Aeromatic Fielder Strea-1™, please call us or write to us at the following address:

GEA Process Engineering Inc.
9165 Rumsey Road
Columbia, Maryland 21045, USA
Tel: +1 410 997 7010
Fax: +1 410 997 5021
E-mail: gea-pe.us@gea.com

Request Information
If you are interested in learning more about a particular product and/or service offered by GEA Process Engineering Inc, please use this form to contact us,

Request more information Click here to request more information

 Back Top of page Top of page