The following standard pilot plants and small units may be ordered directly from our Food & Dairy Dryer Division.
FILTERMAT® FMD 12.5 Spray Dryer
- Gentle drying
- For sticky, hygroscopic, and thermoplastic products
- Produces non-dusty agglomerated powder
- Three drying stages plus cooling stage
- Nozzle atomizer
- Evaporation rates to 35 kg/hr
- Overall size 25' x 23' x 15' high
|
FILTERMAT® Spray Dryer
|
FMD 12.5 Specifications
  FMD 12.5 Data Sheet
MOBILE MINOR™ Spray Dryer
- Sets the standard in lab dryers
- Raisable roof for easy cleaning
- Feed rates as low as 0.5 l/hr
- Evaporation rates to 7 kg/hr
- Electric air heater 7.5 kW
- Maximum inlet temperature 350°C
- Air-driven rotary atomization
- Overall size 3' x 6' x 6' high
- Mounted on wheels for mobility
MOBILE MINOR™ Data Sheet
|
MOBILE MINOR™ Spray Dryer
|
Explosion Proof MOBILE MINOR™ Dryer
- Run under positive pressure
- Once-through inert process gas
- Drying gas rate up to 80 kg/hr
- For non-aqueous feeds
- Solvent recovery system
- Separate electrical controls
- Rotary or nozzle atomization
- One- or two-point product collection
- Overall size 8' x 7' x 6' high
|
Explosion Proof MOBILE MINOR™ Dryer
|
PRODUCTION MINOR™ Spray Dryer
- Rotary wheel or nozzle atomizers
- One- or two-point product collection
- For aqueous feeds
- Gas-fired air heater
- Maximum inlet temperature 450°C
- Evaporation rates to 32 kg/hr
- Overall size 6.5' x 6.5' x 10' high
- Airbroom for thermoplastic products
- 316 stainless steel product contact
PRODUCTION MINOR™ Data Sheet
|
PRODUCTION MINOR™ Spray Dryer
|
Bowen No. 1 Tower Spray Dryer
- Mixed flow atomization
- Handles aqueous slips
- Average particles to 120 microns
- Two-point product separation
- Chamber size 0.8 m diameter X 1.8 m high
- Direct gas-fired heater
- Maximum inlet temperature 500°C
- Evaporation rates to 40 kg/hr
- Overall size 10' x 6.5' x 10.5' high
|
Tower Spray Dryer
|
P6.3 Spray Dryer
- Largest standard plant
- For small scale production
- Rotary wheel or nozzle atomizers
- One- or two-point product collection
- Can be readily modified
- Direct-fired gas or electric heat
- Chamber size 1.6 m diameter x 0.8 m x 60°
- Evaporation rates to 60 kg/hr
- Overall size 11.5' x 9' x 15' high
P6.3 Spray Dryer Data Sheet
|
P6.3 Spray Dryer
|
Vibro-Fluidizer®
- For drying, heating, or cooling
- Variable residence times
- For wet solids and cakes
- Fluidizing velocity up to 1.2 m/s
- Perforated gas distributor 0.3 m 2
- Split housing for easy cleaning
- Maximum inlet temperature 300°C
- Evaporation rates to 40 kg/hr
- Overall size 13' x 5' x 9' high
|
Vibro-Fluidizer®
|
SWIRL FLUIDIZER™ - Minor
- For paste and filter cakes
- Fast drying times
- Produces fine particles
- Cartridge filter product collection
- Variable speed screw feeder
- Electric air heater 7.5 kW
- Overall size 5' x 4' x 7' high
- Available as kit to connect to existing Portable Spray Dryer
|
SWIRL FLUIDIZER™
|
|
Click here to request more information
Back
Top of page